Toledo Speedway

In 1968, Toledo Speedway promoter and ARCA founder John Marcum came up with the idea of running a 200 lap Late Model invitational—the Glass City 200.  Despite a 20-year hiatus of the race from 1978-1998 (when the Toledo track was sold), the race was revived in 1999 when Marcum’s grandson, Ron Drager, purchased the track with business partner Roy Mott.

And the race still carries the prestige and notoriety that it once did back in the 1960’s and 1970’s. 

The 1973 edition of the 200 saw a formidable duo team up for this race.  With Joy Fair on the sidelines due to a serious crash at Toledo in July, Joe Ruttman was tabbed by car owner William Gillelan and Fair to drive the now-famous #1 Ford Maverick.

Ruttman wheeled the Maverick for the final 2 months of the season, and get this—the combo won 13 of 14 races, taking wins throughout the Midwest not only at weekly shows, but also several big races, including Toledo’s Glass City 200….

**The following includes 11-12-13 LM update and 11-20-13 SP update--as noted below)

Point of emphasis, all divisions:  Over-flow hose must exit lower right corner of front windshield and go straight up (don’t put a 90 degree fitting on the end!)

Page 48, 2.  Bodies:  (adding):  No vents, louvers or holes in any body part.

Page 49, H.  Front nose piece:  (adding):  Maximum 4 inch lip on splitter; maximum 4 inch inside bracing.

Page 49, Engines:  (adding):  Engine and components may not be remotely adjustable.

Page 50, 9.  Weight:  (point of emphasis, adding-revised 11-12-13):  All car measurements, minus weight, will be done in a single, consistent manner, according to driver preference---either driver in the car or out of the car.  There will be no combination used in determining measurements.

Page 50, 11.  Fuel cell:  (from 1-15-13 bulletin):  If fuel cell is made of aluminum, steel plates of similar gauge are to be installed at the front and rear of cell, to inspector’s approval.

FIGURE 8’S

Page 55, 2.  Engines:  (add):  Non-magnetic connecting rods not permitted.

Page 55, 2.  Engines:  (from 7-18-13 bulletin):  (adding):  GM crate engine part # 19258602 is approved with an ARCA approved 2 barrel carburetor for use in competition.  Stroke must remain stock on GM V6 and Ford V6 engines.  Chrysler V6 will be allowed maximum 3.50.  Only stock hydraulic lifters can be used if engine is equipped with a roller cam.  No additional parts.  (also adding crate part number #19258602 to chart; 4.000 bore, 350 cubic inches).

Delete:  Roller cams are not permitted.

Page 57, 11.  Wheel/Tires:  Hoosier 880 26.5/8.0-15 and Hoosier 880 27.5/8.0-15 tires only, maximum 8 inch tread width.

Page 58, 15.  Roll bars:  (re-wording, deleting last 6 sentences, starting with ALUMINUM in caps):  Steel is only acceptable material for floor pan and firewalls.  No box type decking in driver’s compartment, may angle from right side door to base of driver’s seat.  Interior must be completely enclosed; no holes.

STREET STOCKS

Page 60, 2.  Engines:  (add):  Non-magnetic connecting rods not permitted.

Page 62, 14.  Interior: (delete paragraph, replace with this complete re-wording) Steel is only acceptable material for floor pan and firewalls.  No box type decking in driver’s compartment, may angle from right side door to base of driver’s seat.  Interior must be completely enclosed; no holes.

Page 63, 17, Tires:  Hoosier 880 26.5/8.0-15 and Hoosier 880 27.5/8.0-15 tires only, maximum 8 inch tread width.

Page 63, 18. Wheels:  (Change):  Wheel spacers permitted. 

Page 63, 20.  Weight:  (Change):   Engines of 358 cubic inches or less-minimum 2900 lbs. (was 3000); maximum 56% left side weight.  Engines over 358 cubic inches-minimum 3050(was 3150) lbs., maximum 56% left side weight.  56-44 % ratio. (was 45-55).

Page 65, 25.  (Adding):  No mirrors.

SPORTSMAN

Page 67, 2. A.  Engine:  Change:  Non-magnetic connecting rods are not permitted.

Page 68, 8.  Body:  (add, 11-20-13 update):  Front over-hang maximum 46 (was incorrect at 45) inches from center of hub.

Correction: Rear quarter panel height 34 ½” maximum (34 inches is incorrect)

Page 69, 9.  Interior:  (Changing must to may as follows):  Steel is only acceptable material for floor pan and firewalls.  No box type decking in driver’s compartment, may angle from right side door to base of driver’s seat.  Interior must be completely enclosed; no holes.

Page 69, 12.  Tires: Hoosier 880 26.5/8.0-15 and Hoosier 880 27.5/8.0-15 tires only, maximum 8 inch tread width.

X CARS

Tires:  8 inch Hoosier 880 and 8 inch Hoosier Sportsman tires, 8.0-15, 26.5 and 27.5 sizes, will both be permitted for 2014.  May mix compounds.  All tires must be purchased from ARCA and be in ARCA barcode inventory system.  No soaking or altering of tires in any manner.

Add:  Front bumper can be no wider than center of tread width.

2014 ARCA FLAT ROCK-TOLEDO RULE BOOK WILL TAKE PRECEDENT OVER THIS PAGE.

ARCA Sportsman driver Norm Lewallen has lost 2 crew members in the off-season.  Crew Chief Charlie Austin, age 49, passed away unexpectedly December 23.  Austin was teamed up with Lewallen since 1986 and never missed a race in the 27 years of racing with Norm.

Crew member Stacy Fackler, age 51, passed away August 31, a day after the 2013 Season Championship race at Toledo Speedway.  Fackler had been a part of the Car # 4 Lewallen Racing Team for a number of seasons.

Our thoughts and prayers go out to the families of both gentlemen.

(TOLEDO, Ohio – March 14, 2014) – Reigning ARCA Racing Series presented by Menards champion Frank Kimmel and 11-time Indy 500 starter Davey Hamilton will headline the 2014 ARCA Press Conference scheduled for the Hollywood Casino in Rossford, Ohio on March 25.

(NOVI, MI - March 18, 2014) - Flat Rock and Toledo Speedways will take part in the first-ever Motor City Hot Rod and Racing Expo, set for Saturday and Sunday, March 22-23 at the Suburban Collection Showplace in Novi, MI.

Congratulations to all of the Flat Rock and Toledo Champions! The Flat Rock and Toledo Speedway awards banquet in Saturday, October 12 at the Toledo Speedway Bar and Grille banquet room at 6 p.m. http://www.arcaracing.com/news_flatrock.php?contentid=16612

(TOLEDO, Ohio - March 17, 2014) – Get ready to crack open the 7-UP in victory lane at Toledo Speedway. That’s what ARCA veteran outlaw late model racer Dennis Strickland hopes to do at this year’s 7-Up 150 season opener at Toledo Saturday, April 12.